Five portable power stations that can power a refrigerator

An overview of five portable power stations shows which models can keep a refrigerator running and for how long at different consumption levels. The article lists technical specifications, charging times and approximate autonomy calculations for each model.

Calculating the expected running time of a refrigerator

Run time depends on the refrigerator’s average consumption taking compressor duty cycles into account. Two consumption scenarios are considered: 40 W (watts) and 80 W (watts), which correspond approximately to 0,96 and 1,92 kW·h (kilowatt-hours) per day.

charging stations near the refrigerator in the kitchen

If you subtract 20% of capacity for losses and the station’s own consumption, a battery of 1024 W·h (watt-hours) will provide roughly 20 hours of operation at 40 W (watts) and 10 hours at 80 W (watts). Heating, frequent door openings and defrosting reduce autonomous run time.

Delta 3 and Aferiy P180 Pro — 1024 W·h and up to 20 hours of run time

The EcoFlow Delta 3 has a 1024 W·h battery, a nominal power of 1800 W and a peak of 3600 W, and its LiFePO4 battery is rated for 4000 cycles to 80% remaining capacity. The model weighs 13 kg; a full charge from the mains takes 56 minutes. The station offers 11 outputs: four AC sockets, two USB-A ports at 18 W, two USB-C ports at 100 W, a car socket and two DC5521 ports. For the Delta 3 the calculated refrigerator run time is approximately 10−20 hours.

detailed view of the station panel and outlets

The Aferiy P180 Pro also has a 1024 W·h battery, a nominal power of 1800 W and offers a pure sine-wave output. Weight is 11,64 kg; a full charge from a socket takes about 1,1 hours (66 minutes). Its LiFePO4 battery is claimed to exceed 4000 cycles while retaining 80% capacity. The station has nine outputs, including two AC sockets, USB-A at 18 W, USB-C ports at 20 W and 140 W, a car socket and two DC5521 ports. For the P180 Pro the calculated refrigerator run time is also 10−20 hours.

Jackery Explorer 1000 V2, Vtoman Jump 1500X and Genki GK-800 — different capacities and limitations

The Jackery Explorer 1000 V2 features a 1070 W·h battery, a nominal power of 1500 W and a peak of 3000 W; its weight is 10,8 kg. Charging from the mains takes 1,58 hours (approximately 95 minutes). The LiFePO4 battery is rated for 4000 cycles and is expected to retain around 70% capacity afterwards. Output options include two AC sockets, a USB-A at 18 W, two USB-C ports at 30 W and 100 W, and a car socket. The estimated refrigerator run time is 11−21 hours.

The Vtoman Jump 1500X has a base battery capacity of 828 W·h, a nominal power of 1500 W and a peak of 3000 W; weight — 14 kg. Its LiFePO4 battery is rated for 3100 cycles. With a 180 W adapter, a full charge takes roughly 4−5 hours, so during short power restorations the station may not have time to fully recharge. For the Jump 1500X the calculated refrigerator run time is about 8−17 hours.

The compact Genki GK-800 has a 512 W·h battery and weighs 6,5 kg; nominal power is 800 W. Charging from the mains takes 1,5 hours, and the LiFePO4 battery is claimed at 3000 cycles. Because its nominal power is 800 W you should check the compressor’s starting (inrush) draw — the compressor may fail to start. If the refrigerator does start, the estimated run time is 5−10 hours, while high-power appliances such as microwaves or hairdryers are not suitable for this model.

Radyslav Haievych

Radyslav Haievych

Editor of the News section (Finance)

Editor of the 'News' section, specializing in financial markets, macroeconomics and companies. He has an economics degree from Dnipro and experience working with local market materials. Writes quickly and accurately, and verifies data through official registers, financial reports, expert comments, and primary sources before publication.

All author's materials (1440)

Leave a reply